The Best Free GPS Software app downloads. Convert Google Earth into a real-time GPS navigation. Manage your Inforad speed camera warning system from your PC.

PC Marine Navigation 1000nm Comparison Test PC Marine Navigation 1000nm Comparison Test Introduction There are a number of free or nearly free, marine navigation systems for the PC which are supported by forums and a loyal band of enthusiasts. I have long wondered how these systems would stand up on a long voyage over several days of sailing. Which would be best in terms of reliability and usability and is navigating using a laptop as a real alternative to a costly dedicated onboard nav systems provided by such manufacturers such as Garmin and Raymarine. The results were interesting and in some cases surprising Test Objectives To compare the: • Suitability, • Reliability • Accuracy of four navigation systems in a real life situation over 1000nm and 10 days at sea. Limiting factors • Running four navigation systems on a single netbook may have reduced performance and/or reliability. • I am more familiar with SeaClear and Google Earth than OpenCPN and PolarViewNS. It would have been easy to slip into the ‘easy chair’ of known software.

• Any comparison is likely to be more subjective than objective. • Unable to compare commercial navigation systems due to cost with the exception of the Raymarine G80 chartplotter installed on the vessel. • Used differing charts formats (SeaClear: WCI, OpenCPN: Cmap 93, PolarViewNS:.KAP) so difficult to compare chart displays like for like. • Our vessel was not equipped with an AIS deceiver or transponder so the AIS part of the test was conducted with a live AIS feed from San Francisco. Even with the above limiting factors it was felt that the comparison test would yield results useful for the average yachtsman (or woman) Equipment Used Samsung NC10 (from ) Bluetooth GPS receiver (from ) Power supply 12 v to 19v (from ) Marine Navigation Software Used SeaClear from OpenCPN From PolarCom + PolarView from Google Earth from Accessory Software Used FransonGate To split GPs signal into four COM outputs from Navigator V. 1.0.12: To create kml files for Google Earth from Charts SeaClear.WCI charts + georeferenced satellite images from PolarViewNS:( PolarView + PolarCom).kap charts from + georeferenced satellite images from OpenCPN: Cmap 93 charts (not legal) Google Earth: Overlay charts PC Marine Navigation systems under test • SeaClear v.1.0.0.205 • OpenCPN v. 2.1.0 Build 624a • PolarCom + PolarView v.1.4.72 • Google Earth with Chart Overlays v.

5.2.1.1329 (beta) The Trip • Start:Bodrum (Turkey) • Destination: Alexandria (Egypt) • Return Destination:Bodrum (Turkey) via Symi and Kos (Greece) • Trip Length:1050 nm (Measured via track) • Duration: Outbound approx 4 days Inbound approx 6 days The Vessel • Jeanneau 12.5 m • 160 watt solar panels • Raymarine G80 Chartplotter • Autohelm autopilot • 50 hp Yanmar diesel engine Test Comparison Criteria. Downloading How easy is it to download the software and does it take a long time. Installation Is installation straightforward and safe?

Support What support is available? Chart Availability Are charts easily available within the US and worldwide?

Installing Charts Is it easy to install charts? Documentation Is documentation available and easy to use?

Connecting GPS How difficult is it to connect to your GPS? Pretrip planning • Route planning • Weather Planning • Navigation During the voyage • Usability • Positional accuracy • Satellite Image Support • Stability • Route Following • AIS Display • AIS Collision Warning Test Results SeaClear Downloading SeaClear was easy to download from (10/10) Installation Installation was straightforward and the installation was “self contained” in the sense that all required files are located under a SeaClear folder and the computer register is not accessed or modified. The calibration and chart installation program, MapCal, was also installed but a desktop icon was not created. This has to be created manually. MapCal is the sole method of installing charts for SeaClear (8/10) Support Development of SeaClear seems to have come to a halt with little direct support from the developer. The main support path is the forum This forum is very active and supportive of SeaClear and I know the SeaClear developer, Ollie, monitors the forum and steps in with advice when needed.

(9/10) Chart Availability SeaClear uses unencrypted BSB charts or charts in the SeaClear.WCI format. Within the US charts in the required format are freely available but outside the US legal availability is limited Companies such as 1yachtua supply charts for the Med. (7/10) NOTE: VisitMyHarbour now supply legal UK/Ireland/Belgium and Netherlands charts for SeaClear, with more areas coming. Installing Charts Installing charts was a convoluted process using the utility MapCal. Installing charts was a big support load for the SeaClear forum on Yahoo.

(6/10) VisitMyHarbour charts are pre installed saving the user any bother. Documentation Documentation is provided in the PDF format. The documentation was comprehensive but very poorly organised and presented. This has led to publications such as SeaClear Unleashed (7/10) The VisitMyHarbour packages have a comprehensive built in help section written by the author of THIS article, Richard Fariman Connecting GPS Once the COM port for the GPS signal is established, connecting to SeaClear was straightforward but the BPS must be set to 4800.

The input NMEA signal can be monitored via SeaClear’s System Monitor. On rare occasions SeaClear lost the input signal and had to be restarted. (8/10) Pre-trip planning • Route planning You have to enter the Route Editor mode to create and edit routes. Some problems were experienced with adding or inserting waypoints to a route but those were relatively easy to overcome. (7/10) • Weather Planning Not possible with SeaClear (0/10) Navigation During the voyage • Usability The GUI of SeaClear was old fashioned and cluttered compared to the other systems.

This could be improved by hiding the dashboard. (8/10) • Positional accuracy For the majority of the trip SeaClear was positionally accurate. (9/10) On one occasion. I observed that SeaClear was plotting a position about 200 m to the east of my true position The boat was on the west side of the harbour and the plotted position on the east • Satellite Image Support SeaClear accurately displayed georeferenced satellite images although these were not quilted. • Stability SeaClear was stable throughout the whole 10 day test. (10/10) • Route Following Once loaded it was easy to activate a route.

If you are some distance from the route SeaClear plotted a route at right angle to the first leg to reduce XTE to a minimum as soon as possible. This may cause problems with a connected autopilot. The solution was to ensure your first waypoint is in close proximity to your vessel before you activate the route. It was only possible to have one route at a time on display. (7/10) • AIS Display Connecting the AIS signal was just a matter of selecting a port via Tools/Properties and setting the speed to 38400 bps. SeaClear multiplexes its inputs into a single stream which can be seen via the System Monitor. SeaClear quickly plotted the positions of vessels with AIS transponders.

All the AIS vessels display in the AIS list at the SeaClear Dashboard The Find button locates the vessel for you, or the Info button opens an AIS Target Info dialog box It was not possible to de-clutter the AIS display of vessels. Vessels under way and at anchor were displayed (7/10) • AIS Collision Warning CPA (Closet Point of Approach)Max and TCPA (time to Closest Point of Approach) are set via Tools/Properties Setting CPA and TCPA values too high, resulted in SeaClear identifying most vessels in the area as potential collision risks with the resulting alarms If CPA and TCPA settings are violated SeaClear sounds an audible collision warning and a collision warning displays on screen which shows the collision danger vessel name near your vessel’s position. (9/10) OpenCPN Downloading Downloading was fast and easy from (10/10) Installation Installation was fast and trouble free. (10/10) Support There is a very active support forum. As the software is being actively developed the developers monitor the forum and respond very quickly. Feature updates occur almost every month with more frequent bug fixes as required. (10/10) Chart Availability OpenCPN utilises BSB charts which are freely available within the US with limited availability worldwide.

Cmap 93 vector charts are also supported but the use of these charts is illegal (7/10) VisitMyHarbour are now making charts for OpenCPN and Polar Navy, available on a portable ChartStick Installing Charts Chart installation was quick and easy. Browse for chart directory, add it to the list and force a full database rebuild and the charts are displayed on screen. (10/10) Documentation Documentation is provided online but is limited (6/10) Connecting GPS On start up, OpenCPN automatically searches for free COM port with a valid NMEA signal. This proved to be foolproof and reliable (10/10) Pretrip planning • Route planning OpenCPN one of the best route creation tool of all the systems.

Simply click a single on screen button and create your route and click to creates waypoints and the route on the chart (10/10) • Weather Planning OpenCPN displays GRIB files but these have to be downloaded from a third party service or server such as the free Ugrib service. In my case I used PolarViewNS to download the files.

The GRIB files were later displayed so I could weather plan my return trip (8/10) Navigation During the voyage • Usability With its clean uncluttered GUI OpenCPN was easy to use during the trip (9/10) • Positional accuracy OpenCPN consistently plotted a position approx 200 meters east of the true position on the Cmap 93 charts. This was confirmed by manual position fixing. As all the software was using a common GPS signal I conclude that the position error was due to OpenCPN or and error in the Cmap 93 charts. Once the error was quantified, I could take this into account when navigating. (5/10) NB this is a problem with the CM93 charts, OpenCPN displays VisitMyHarbour ChartStick charts accurately • Satellite Image Support I could find no way of displaying BSB (.kap file) charts alongside Cmap 93 so could not test satellite image support.

So at present I assume it is not supported (0/10) • Stability On the whole OpenCPN was stable during the test and only crashed twice during the 10 day trip (8/10) • Route Following To activate and follow a route, the route or waypoint is right clicked and ‘activate route’ selected. The nearest way point flashes to confirm activation. A navigation window displays with XTE, BRG, RNG and TTG.

(9/10) • AIS Display AIS connection was easy to achieve via the AIS tab of Toolbox OpenCPN quickly plotted the positions of vessels with AIS transponders. Right clicking any AIS target opens the AIS Target Query dialog box Or, all AIS targets within range could be displayed in the AIS Target list dialog box It was possible to de-clutter AIS display via the ToolBox/ AIS Tab. In particular vessels at anchor could be removed from the display ((9/10) • AIS Collision Warning In a potential collision situation OpenCPN sounded a raucous audible alarm and an transparent alarm screen displays identifying the vessel in question The alarm has to silenced or acknowledged. In addition the potential collision risk vessel is identified on the chart display.(9/10) PolarViewNS Downloading Downloading was straightforward from with the offer of a free trial with up to 5 activations.

(10/10) Installation Installation of the two PolarViewNS components (PolarView + PolarCom) was easy with no problems (10/10) Support There is a support forum but seems to have little activity. Help via email is available and replies were received within a few hours (8/10) Chart Availability Charts are easily available within the US in RNC and ENC formats. Fxguru Software For Pc Free Download more. There is limited availability outside of US waters. BSB charts are supported where available. (7/10) VisitMyHarbour are now making charts for OpenCPN and Polar Navy, available on a portable ChartStick Installing Charts Installing charts was just a case of browsing for a chart directory and PolarView did the rest. (10/10) Documentation Documentation is provided online but is limited (6/10) Connecting GPS Connecting to the GPS was just a case assigning the port a name and a COM port number.

This was done within PolarCom. The port with id of 0 was reserved for connection to PolarView. (8/10) Pretrip planning • Route planning Route creation was just a case of shift clicking and the chart to create waypoints. Each leg of the route was labelled with the bearing and distance to the next waypoint.

(10/10) • Weather Planning PolarViewNS was the only system that allowed direct downloads of GRIB files. An area is selected on the chart and the downloads were from a dedicated server that had acceptable download speed. The files were automatically saved to allow for weather planning and later display during the trip. I used the GRIB file display to plan the return trip to take advantage of wind shifts in our favour.

As I needed to go NW and the prevailing winds were NW any advantage due to wind shifts S or W took hours off my trip(10/10) Navigation During the voyage • Usability The GUI for PolarViewNS was the cleanest and clearest of all the systems under test. The instrument display of PolarCom was outstanding and clearly visible from the helm. (9/10) • Positional accuracy PolarViewNS was 100% accurate at all time during the trip.(10/10) • Satellite Image Support PolarViewNS accurately displayed georeferenced satellite images and these were quilted with the BSB charts (10/10) PolarViewNS also has a search and download feature that searches for images for a selected area and quilts the image with the existing BSB charts, • Stability PolarViewNS was stable throughout the 10 day test. (10/10) • Route Following Activating a route was as simple as selecting it from a list in Route Manager. Once activated data was transferred to PolarCom for large instrument display and for use with the various alarms such as anchor alarm, waypoint arrival act (9/10) • AIS Display Connection to the AIS signal was via the Configure option in PolarCom All AIS targets within range we plotted by PoarViewNS and clicking on the target displayed some limited data about the vessel. A list of all AIS targets displayed all available AIS data of vessels within range. It was possible to declutter AIS display from within PolarCom.

(9/10) • AIS Collision Warning CPA and TCPA are set from within PolarCom If the CPA and TCPA values are infringed an audible alarm sounds and an Alarm dialog box opens. Collision risk vessels are highlighted in red on the chart. And highlighted in red in the AIS Vessel List dialog box (9/10) Google Earth (with Navigator) Downloading Downloading from Google was straightforward but took several minutes. (Disable the Chrome download option to save time) (9/10) Installation Installation was straightforward but involved downloading several large files from Google (9/10) Support There are a vast number of third party sites that provide support for Google Earth as well as Google themselves (10/10) Chart Availability Not 100% applicable as Google Earth is image based but BSB charts are available to overlay Google Earth from 3 rd party vendors. Available for within the US but less available for outside US waters (7/10) NB: VisitMyHarbour make VisiCharts (Uk and Ireland) that work with Google Earth Installing Charts Once obtained, as simple as opening a.KMZ or.KML file within Google Earth (10/10) Documentation There is a vast amount of documentation easily accessible. (10/10) Connecting GPS I failed to connect the Bluetooth GPS directly to Google Earth so connected via Navigator which was easy. (8/10) Pretrip planning • Route planning Routes were easy to import in the GPX format and Navigator added the feature of a waypoint arrival alarm.

If you visit each of your destinations when connected to the internet the satellite imagery is saved to cache for later use offline (9/10) • Weather Planning Although GRIB files are at present not supported, there are many sources of weather data available to Google Earth (9/10) Navigation During the voyage • Usability I constantly fell back to using Google Earth during the trip particularly when in proximity to land. The images gave a clear indication as what to expect when entering a harbour and the terrain feature helped with identifying the profiles of coastlines and islands. (9/10) • Positional accuracy Google Earth was 100% accurate when compared to the other PC based systems and to the Raymarine G80 onboard.

(10/10) • Satellite Image Support As Google Earth is an image based program it is no surprise that it out shone the other system. I was able to plot my position on high definition images and easily identify islands and coastlines. (10/10) • Stability There is a bug with Google Earth in that if the PC hibernates with Google Earth running the computer crashes on restart. This proved not to be a problem as I disabled hibernation and just turned off backlighting to preserve battery power.

Google Earth was very hard on CPU and memory resources but did not crash the PC in normal use. (7/10) • Route Following Although not strictly route following Google Earth could be set to “fly to” each of the waypoints on the route.

(5/10) • AIS Display It is not possible to directly connect an AIS signal to Google Earth. With an internet connection third party providers supply AIS data in a form that can be displayed in Google Earth.